Motorola MPC564EVB User Manual page 73

Commands
IRD Internal Register Display
Usage: IRD <module.register>
This command displays the internal registers of different modules inside the MPC500. In the
command line, module refers to the module name where the register is located and register refers
to the specific register to display.
The registers are organized according to the module to which they belong. The available modules
on the MPC500 are USIU, TPU_A, TPU_B, QADC_A, QADC_B, QSMCM_A, MIOS14,
CAN_A. Refer to the MPC564 user's manual for more information on these modules and the
registers they contain.
Example:
ird usiu.plprcrk
Chapter 3. Using the Monitor/Debug Firmware 3-23