Table of Contents
Advertisement
Commands
DLDBUG
Download dBUG
Usage:
DLDBUG
The DLDBUG command will download the dBUG monitor to the MPC564EVB board. First it will erase
all sectors of Flash that dBUG occupies, then it will download the code through the serial port. Upon asking
if the user is sure they want to do this, the user should respond by typing "yes" if they want to continue. The
DLDBUG command will work at baud rates up to and including 57600.
Xon/Xoff flow control needs to be turned on in the terminal window to download data.
To download the dBUG monitor to the board, the command is:
dldbug
Chapter 3. Using the Monitor/Debug Firmware
3-17
Advertisement
Table of Contents
