Installing The Usb Smart Cable And Driver; Windows Vista-32/64 - ZiLOG UM018112-0908 User Manual

Installing the USB Smart Cable and Driver

Before connecting the USB Smart Cable to your system, Windows loads
the appropriate driver from the ZDS II installation directory or CD-ROM.
You can download ZDS II software for a specific device family at
www.zilog.com. Alternatively, if you have an applicable Zilog develop-
ment tool, use the CD-ROM provided. The installation procedure depends
on your Windows operating system version.
Note: Zilog no longer includes CD-ROMs with USB Smart Cable kits
built August 2006 or later.

Windows Vista-32/64

1. Connect the USB Smart Cable to the host PC. The Found New
2. Select Locate and install driver software (Recommended). The
3. Select I don't have the disc. Show me other options.
4. Select Browse my computer for driver software (Advanced).
5. Browse to one of the following driver directory:
UM018112-0908
Hardware dialog box is displayed.
Driver Software Installation window is displayed, and then the
Found New Hardware-USB Smart Cable dialog box is displayed.
For 32-bit Vista:
<ZDS II Installation Directory>
\device drivers\USB\x32
<ZDS II Installation CD>\device drivers\USB\x32
For 64-bit Vista:
<ZDS II Installation Directory>
\device drivers\USB\x64
<ZDS II Installation CD>\device drivers\USB\x64
USB Smart Cable
User Manual
USB Smart Cable
3