Table of Contents
Advertisement
4. Select Specify a location; then click Next.
5. Browse to one of the following driver directory:
6. Click OK, and then click Next after the appropriate driver is found.
7. Click Finish to complete the installation.
Windows 98 SE
1. Connect the USB Smart Cable to the host PC. The Found New Hard-
2. In the Found New Hardware Wizard, click Next.
3. Select Search for the best driver for your device (Recommended).
4. Select Specify a location. Browse one of the following to the driver
5. Click Next, and then click Next again after the appropriate driver is
6. Click Finish to complete the installation.
UM018112-0908
<ZDS II Installation Directory>
\device drivers\USB\x32
<ZDS II Installation CD>\Device Drivers\USB\x32
ware Wizard should activate automatically.
Click Next.
directory:
<ZDS II Installation Directory>
\device drivers\USB\x32
<ZDS II Installation CD>\Device Drivers\USB\x32
found.
USB Smart Cable
User Manual
USB Smart Cable
5
Advertisement
Table of Contents
Need help?
Do you have a question about the UM018112-0908 and is the answer not in the manual?
Questions and answers