Day/Night Submenu - Bosch EX65 Instruction Manual

28 en | Operation
Item
SensUp
Dynamic
EXIT
8.4.4

Day/Night submenu

Item
Day/Night
Switch level
Priority
IR contrast
Color burst
(mono)
EXIT
F.01U.412.061 | 2.0 | 2011.08
Selection Description
Off, 2x, 3x, ..., 10x Selects the factor by which the sensitivity of the
camera is increased.
When active, some noise or spots may appear in
the picture. This is normal camera behavior. It
may also cause motion blur on moving objects.
Returns to main menu.
Selection Description
Auto, Color, Auto - the camera switches the IR cut-off filter on and off
Monochrome depending on the scene illumination level.
Monochrome - the IR cut-off filter is removed, giving full IR
sensitivity.
Color - the camera always produces a color signal
regardless of light levels.
-15 to +15 Sets the video level in Auto mode at which the camera
switches to monochrome operation.
A low (negative) value means that the camera switches to
monochrome at a lower light level. A high (positive) value
means that the camera switches to monochrome at a
higher light level.
Motion, Color In AUTO mode:
Color - the camera gives a color image as long as the light
level permits.
Motion - the camera avoids motion blur as long as the light
level permits (it switches to monochrome earlier than it
would with Color priority).
Enhanced, Enhanced - the camera optimizes contrast in applications
Normal with high IR illumination levels. Select this mode for IR
(730 to 940 nm) light sources and for scenes with grass
and green foliage.
Normal - the camera optimizes contrast in mono
applications with visible light illumination.
On, Off Off - the color burst in the video signal is switched Off in
monochrome mode.
On - the color burst remains active even in monochrome
mode (required by some DVRs and IP encoders).
Returns to main menu.
Instruction Manual
EX65 Explosion-protected Camera
Bosch Security Systems, Inc.