First Time Installation - Akai AK22FLEDCG Instruction Manual

18

First Time Installation

18
First Time Installation
If you are using the TV for the first time, below menu will appear on the screen after turning
on this TV:
When you switch on the TV for the first time, the First Time Installation menu will be displayed on
the screen.
OSD Language
OSD Language
Press ▲/▼ button to select this option and press ◄/► button to select desired language.
/
Press button to select this operation and press
Country
Country
/
Press button to select this operation and press
Press ▲/▼ button to select this option and press ◄/► button to select your country.
Note: If you select other than New Zealand, the unit will not operate correctly for New
NOTE: If you select other than New Zealand, the unit will not operate correctly for New Zealand TV
Zealand TV signals.
signals.
Tuning Setup
Tuning Setup
/
Press button to select this operation and press
Press ▲/▼ button to select this option and press ◄/► button to select tuning type: DTV, ATV, or
DTV, ATV or ATV+DTV.
ATV+DTV.
When above settings are complete, press OK button to start auto channel tuning and this
may take a few minutes.
When above settings are complete, press OK button to start auto channel tuning and this may
Once the auto tuning is complete, your TV will show the first channel found.
take a few minutes.
Once the auto tuning is complete, your TV will show the first channel found.
/
button to select desired language.
/
button to select your country.
/
button to select tuning type: