Installing The Batteries; Remote Control Operation - Akai AK22FLEDCG Instruction Manual

Installing the Batteries

Installing the Batteries
Battery Installation
1. Open the cover at the back of the remote control unit completely.
Open the cover at the back of the remote control unit completely.
1.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+/-) of the batteries are correctly
Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are
2.
aligned and the batteries are properly pushed into place so they can power the remote
correctly aligned and the batteries are properly pushed into place so they can power
control.
the remote control unit.
3. Place the battery cover back.
Replace the battery cover.
3.
Precautions when using batteries
Precautions when using batteries
• Do not use old and new batteries together.
● Do not use old and new batteries together.
• Do not use different types of battery (for example, Manganese and Alkaline batteries)
● Do not use different types of battery (for example, Manganese and Alkaline batteries) together. together.
• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge
● Note that there are chargeable and non-chargeable batteries. Do not attempt to charge
non-chargeable batteries.
non-chargeable batteries.
• Do not drop, step on or otherwise impact the remote control. This may damage the
● Remove the batteries from the remote control unit if you do not intend to use the unit for a
parts or lead to malfunction.
long time.
• Remove the batteries from the remote control unit if you do not intend to use the unit
● When disposing used batteries, follow any guidelines for recycling and disposal of batteries that
for a long time.
apply in your local area.
• When disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
Using the Remote Control

Remote Control Operation

The remote control should be operated within 20 feet (5m) and 30° to the left or the
The remote control should be operated within 5m and 30° to the left or the right of the IR
receiver at the front of the TV. right of the IR receiver at the front of the TV.
NOTES:
• The operating distance may vary according to the brightness of the room.
• Do not point bright light at remote control sensor.
• Do not place objects between the remote control and the remote control sensor.
• Do not use this remote control while simultaneously operating remote control of any
other equipment.
17
13