Pick Mode
Pick Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or trans-
mitted to the host. It is active only while the scanner is in Trig-
ger Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
Multiple Labels in a Volume
Enables/disables the ability of scanner to decode multiple la-
bels in the same image. Several programming options are
available for this feature, see the PRG for more information.
Quick Reference Guide
This feature is not compatible with Multiple Labels Reading
in a Volume. See the PRG for more information.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
Scan Modes
37