Connecting The Base Station - Datalogic Gryphon I GBT4400 Quick Reference Manual

3. The stand can now be repositioned in either horizon-
tal or standing position.

Connecting the Base Station

Figure 1 on page 9 shows how to connect the Base Station to
a terminal, PC or other host device. Turn off the host before
connection and consult the manual for that equipment (if
necessary) before proceeding. Connect the interface cable be-
fore applying power to the Base Station.
The Gryphon GBT can also be Powered by the Terminal. The
external power supply is recommended but not necessary.
When powered by the Terminal, the battery charger is
automatically set as Slow charge.
Base Station Connection and Routing:
ble and Interface (I/F) Cable connectors into their respective
ports in the underside of the Base Station (see Figure 1). Then
connect to an AC Adapter, and plug the AC power cord into
the (wall) outlet.
8
Standing
Connecting the Base Station
Horizontal
Fully insert the Power Ca-
Gryphon™ I GBT4400