Boot Setting - Toshiba DX 730 User Manual

Boot Setting

This function allows you to modify the boot settings.
Boot Priority Options
This tab allows you to set the priority for booting the computer. The Boot
Priority Options setting window will be displayed. Click the up and down
arrow buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.
2.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Boot Speed
This feature allows you to select system boot-up speed.
Fast
Normal
Keyboard
This tab allows you to set conditions for the Keyboard.
Function Keys mode (without pressing FN first)
This feature allows you to configure the Function Keys Mode. For the Hot
key functions can be performed, please refer to the
Chapter 3, Operating Basics.
Special function
mode
Standard F1-F12
mode
User's Manual
Hold down F12 and boot the computer. when the TOSHIBA Leading
Innovation >>> logo screen appears, release the F12 key.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
Reduces system boot-up time. System can boot
only from the built-in HDD and only internal LCD
and keyboard are supported during the boot
process.
System boots up at normal speed. (Default)
Press the function key by itself to use special
functions. Hold FN first to use standard F1-F12
functions.
Press the function key by itself to use standard
F1-F12 functions. Hold FN first to use special
functions.
Hot keys section in
4-13