1.7 Temperature Setting Lock; Spa Maintenance; Cleaning The Filters - Jacuzzi ProTech LCD Owner's Manual

of day. All automatic spa functions will operate normally.
To Unlock The Panel: Press DISPLAY, MODE, and COOLER ( - ), in order,
within five seconds. The "lock" symbol will disappear. All sensor pads are now
active.

1 1.7 Temperature Setting Lock

To electronically lock the temperature setting, first enter the "temperature set-
ting" mode by pressing WARMER ( + ) or COOLER ( - ). Then, within five
seconds, press the three sensors described under "Panel Lock" above. This
will prevent the temperature setting from being changed by unauthorized per-
sons but all other sensors will remain active.
To unlock the temperature setting so that it can be adjusted, simply follow the
instructions above under "To Unlock The Panel.

12.0 Spa Maintenance

Proper and regular maintenance of your spa will help it retain its beauty and
performance. Your authorized Jacuzzi Premium dealer can supply you with
all the information, supplies, and accessory products you will need to
accomplish this.

12.1 Cleaning The Filters

Your Jacuzzi Premium spa is equipped with a skimmer bag and two high-
performance filter cartridges located inside the filter skimmer. Fine debris is
filtered by the circulation pump drawing water through the skimmer bag and
circulation pump cartridge. Larger debris is filtered by the 2-speed pump #1
drawing water through the skimmer bag and main pump filter cartridge
during normal operation and at each skimming/heating cycle. The skimmer
bag and filter cartridges provide unsurpassed water quality by trapping sur-
face and suspended particles.
All models also include filters on their footwell suction covers (Page 14)
that prevent debris from entering pump 2 (and J-380 pump 3), when
operating. These filters must remain in place to protect the pump 2
(and J-380 pump 3) plumbing network(s). They should be cleaned every 2
months, or when weak pump performance is observed.
Page 33