Locking Filter Cycles; Temperature Setting Lock - Jacuzzi J-460 Owner's Manual

• To Lock The Main Control Panel: Press DISPLAY
and WARMER
padlock symbol will appear on the LCD screen. With the
panel locked, none of the components can be turned on and
the only settings that can be adjusted are the standard and
economy filter/heating mode and time of day. All automatic
spa functions will operate normally.
• To Unlock Main Control Panel: Press DISPLAY
, and COOLER
"lock" symbol will disappear. All buttons are now active.

11.5 Locking Filter Cycles

You may keep all filter cycle programs from being inadvertently altered
by electronically "locking" them.
• To Lock All Filter Cycles: Press CYCLE
seconds, press DISPLAY
buttons within five seconds each. A padlock symbol will appear
on the screen. In this state, the status of the cycle program may
be checked, but may not be altered.
• To Unlock Filter Cycles: Press DISPLAY
and COOLER

11.6 Temperature Setting Lock

The spa's temperature setting can be locked to prevent unauthor-
ized use. When locked, all other spa buttons and functions remain
undisturbed.
• To Lock Temperature Setting: Press WARMER
COOLER
immediately press the DISPLAY
WARMER
symbol will appear on the screen.
• To Unlock Temperature Setting: Press WARMER
COOLER
immediately press the DISPLAY
COOLER
Page 40
buttons within five seconds each. A
buttons within five seconds. The
buttons within five seconds each.
button to display temperature setting, then
buttons within five seconds each. A padlock
button to display temperature setting, then
buttons within five seconds each.
button, then within 30
, MODE and WARMER
, MODE
, MODE
, MODE
, MODE
LOCKED LOCKED
, MODE
LOCKED LOCKED
LOCKED LOCKED
LOCKED LOCKED
or
, and
LOCKED LOCKED
or
, and
LOCKED LOCKED
,