Download Print this page
Dakota Alert PR-2500 Owner's Manual

Dakota Alert PR-2500 Owner's Manual

Hide thumbs Also See for PR-2500:

Advertisement

Quick Links

PR-2500
Portable Receiver
Owners Manual
CONTENTS:
The PR-2500, battery charger, and belt clip (figure 1)
NEW ZEALAND
www.bealert.co.nz
FIGURE 1
WARNING:
This device complies with Part 15 of
the FCC rules, operation of this device
is subject to the following conditions:
1. This device may not cause harmful
interference. 2. This device must accept
any interference, including interference
that may cause undesired operation.
AUSTRALIA
www.bealert.com.au

Advertisement

loading

Summary of Contents for Dakota Alert PR-2500

  • Page 1 PR-2500 Portable Receiver Owners Manual CONTENTS: The PR-2500, battery charger, and belt clip (figure 1) WARNING: FIGURE 1 This device complies with Part 15 of the FCC rules, operation of this device is subject to the following conditions: 1. This device may not cause harmful interference.
  • Page 2: Programming The Receiver

    10 days. CHARGING THE PR-2500: To charge the PR-2500 plug the battery charger into an outlet and insert the jack into the charger plug (#5 on figure 2). The unit should be charged for 8-10 hours when the battery is low.
  • Page 3: Setting The Time And Date

    1. Time and Date setting 2. Audible tone ON/OFF 3. Vibrate alert ON/OFF 4. Frequency setting Pushing the side button again after the frequency setting screen will return you to the time/date mode. If no button is pushed in programming mode for 8 seconds the display will automatically return to the time/date mode. NOTE: The display must be in the time/date mode to access the programming screens.
  • Page 4: Reset Button

    WARRANTY: Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God or improper operation.