Caulking - Jacuzzi J-ALLURE J-ALLURELuxury Bathing and Entertainment System Installation And Operation Instructions Manual

J-Allure
Side Walls Caulking
After the side walls are installed, they must be caulked with silicone sealant (not provided). Seal the entire length at
the bottom and from the bottom to top where the side wall moulding meets the attached extrusion. Also caulk the joint
between the side wall extrusion and the fixed panel frame.
Apply the two foam tapes (provided) to side wall. The first tape will butt up against the curve of the side wall with the
second tape against the first tape. Remove the facing paper from both. Install the V seal as shown so that it covers
the joint between the foam tapes.
TWO STRIPS OF FOAM TAPE SIDE
BY SIDE FROM TOP TO BOTTOM
(ONLY ON RIGHT SIDE WALL)
V SEAL
17
WALL
EXTRUSION
FIXED
PANEL
FRAME
SIDE
WALL
SEALANT
SIDE WALL
SEALANT
ALONG ENTIRE
LENGTH OF
SIDE WALL
BATH RIM
SIDE
WALL
SEALANT
(GLASS PANELS AND GUIDES
NOT SHOWN FOR CLARITY)