Command Modes - Zte ZXR10 8900 Series Command Reference Manual

Input the question mark following a character or a charac-
�
ter string, a list of commands or keywords beginning with
this character or character string is displayed. Note that
there is no space between the character (string) and the
question mark.
Press Tab key following the character string. If the com-
�
mand or keyword beginning with this character string is
unique, complement the command or keyword and attach
a space to the end. Note that there is no space between
the character string and the Tab key.
Input a question mark (?) following the command, key-
�
word or parameter. The next keyword or parameter to be
entered is listed, and also a brief description is given. A
space shall be entered before the question mark.
2. If incorrect command, keyword or parameter is entered, the
error isolation is offered with ^ in the user interface after you
press Enter key. Character ^ locates below the first character
of the entered incorrect command, keyword or parameter.
3. The system allows the command or keyword to be abbreviated
to a character or character string that uniquely identifies this
command or keyword. For example, show command can be
abbreviated to sh or sho.
4. User interface supports the function of recording input com-
mands. Maximum ten history commands can be recorded. This
function is very useful in re-invocation of a long or complicated
command or ingress.
To re-invoke a command from the record buffer, conduct one
of the following operations.
Command
Press Ctrl-P or the up arrow key
Press Ctrl-N or down arrow key
Use show history command in any mode, and the latest sev-
eral commands in this mode will be listed.

Command Modes

The command modes in this manual are as follows:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 Command Introduction
Function
It re-invokes the latest
commands in the record
buffer. Repress these keys to
invoke old commands forwards.
Roll commands downwards.
When the last command line is
reached, one more operation
will roll the commands from
the beginning of the buffer
cyclically.
3