Advertisement
Operation
Battery Replacement
Unscrew the tailcap and insert new batteries with
positive ends towards LED head assembly.
Replace tailcap and hand tighten. Press tailcap
pushbutton switch to test.
Note: If batteries are inserted with positive ends
towards the tailcap, the unit will not light.
Damage will not occur. Reinsert batteries with
positive ends towards the LED assembly.
WARNING: Lithium batteries can explode or
cause burns if disassembled, shorted, recharged.
exposed to water, fire, or high temperatures. Do
not place loose batteries in a pocket, purse or other
container containing metal objects, mix with used
or other battery types, or store with hazardous or
combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and
regulations for disposal.
Maintenance
Clean and lubricate threads with a clean cloth and
apply thin coat of silicon-based lubricant to
rubber O-rings.
Note: Do not use petroleum-based lubrication on
SureFire O-rings. After prolonged exposure to
moisture, the bezel and batteries should be
removed, inspected, and dried if necessary.
This unit has
approval
Advertisement
