Advertisement
OPERATION
Lock-out Tailcap
The lock-out position disables the tailcap
pushbutton switch and is suggested to avoid
accidental light activation during storage. From the
momentary-on position, rotate the tailcap
approximately one and one half turns counter-
clockwise to lock the light in the OFF position.
Battery Replacement
Unscrew the tailcap and insert new batteries with
positive ends toward LED assembly. Replace
tailcap and rotate clockwise to the momentary-on
position. Depress tailcap pushbutton switch to test.
WARNING: Lithium batteries can explode or
cause burns if disassembled, shorted, recharged or
exposed to fire or high temperatures. Do not mix
with used batteries or other battery types, or put in
backwards.
Maintenance
Twice yearly (or more frequently depending on
usage) clean and lubricate threads with a clean
cloth and apply thin coat of silicon-based lubricant
to rubber O-rings. Note: DO NOT use petroleum-
based lubricant on SureFire O-rings. After
prolonged exposure to moisture, the bezel, lamp,
and batteries should be removed, inspected, and
dried if necessary.
Make sure the Lamp is off before storage to
prevent damage caused from overheating the
Lamp or nearby objects.
This unit has
(U.S. Patent Number 6,222,138)
Caution
approval
Advertisement
