Advertisement
Quick Links
With the purchase of this SureFire flashlight,
you have invested in one of the world's best
"illumination tools."
We believe it to be a prime example of
our philosophy that design decisions should
always be made in the interest of the product
being the very best it can be.
Frequently, this means deciding to use a
more costly process or a more expensive
material than would normally be called for.
We know that in order to produce the best, one
must do it right.
We thank you for supporting this decision
and electing to confirm our belief in "no
compromise" in a product that, by its
performance and reliability, may some day be
called upon to save your life.
There is no other choice.
MILLENNIUM
COMBATLIGHT
125/225 Lumens
John Matthews
President, SureFire
M3
TM
TM
Advertisement
Related Manuals for Surefire MILLENNIUM M3 Combatlight
Summary of Contents for Surefire MILLENNIUM M3 Combatlight
- Page 1 MILLENNIUM COMBATLIGHT 125/225 Lumens With the purchase of this SureFire flashlight, you have invested in one of the world’s best “illumination tools.” We believe it to be a prime example of our philosophy that design decisions should always be made in the interest of the product being the very best it can be.
- Page 3 Rogers/SUREFIRE shooting technique and the Harries technique. As a member of the Millennium series of SUREFIRE lights, many of the components are interchangeable with the M500A and M100 WeaponLights should they be needed during field operations.
- Page 4 M3 COMBATLIGHT There are two ways to activate the light from the M3. The Tail Cap switch of the Flash- light can be activated by rotating the Tail Cap in a clockwise direction for a constant “ON” setting or by pressing on the Push Button for temporary light.
-
Page 5: Specifications
SPECIFICATIONS Power Output MN10 - 125 Lumens MN11 - 225 Lumens Run Time MN10 - 60+ Minutes MN11 - 20 Minutes (Approx.) Battery Type Lithium SF123A Number Required Three (3) Supplied Length 7.25 inches Weight 7.6 ounces Diameter Body - 1.00 inches Bezel - 1.62 inches Lamp Assembly MN10, MN11 - High Pressure... -
Page 6: Parts Replacement List
PARTS REPLACEMENT LIST Component Part No. Lithium Battery SF123A Bezel Assembly 13703-1 Flashlight Body 13443-1 Grip Ring Spacer 12446-1 Grip Ring 12447-1 125 lumen Lamp Assembly MN10 225 lumen Lamp Assembly MN11 Lanyard 12452-31 Lanyard Ring 12455-11 Rear O-Ring Seal (front) 19-01-040 Rear O-Ring Seal (end) 19-01-077... - Page 7 M3 COMBATLIGHT PUSH BUTTON LANYARD W/RING LOCKOUT TAIL CAP GRIP RING W/SPACERS BODY BATTERY FRONT O-RING LAMP ASSEMBLY BEZEL ASSEMBLY LENS...
-
Page 8: Changing The Lamp
2. Remove the Lamp and replace with the desired Lamp. Avoid touching the inside of the Lamp envelope or Reflector as this will degrade the performance of your SureFire Light. 3. Install the Bezel back on to the Body. BEZEL LAMP... - Page 9 1. Remove the Tail Cap by unscrewing it until it is free of the Body. 2. Remove the Batteries from the Body and replace, observing proper Battery polarity. 3. Install the Tail Cap back on to the Body, turning it until the light comes on. Then back off 1/2 to 1 turn until the light turns off.
-
Page 10: Customer Service
(no COD’s please) to: SUREFIRE LLC Repairs Department, RA# ___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708 SUREFIRE will pay any reasonable shipping costs to return the unit to you. Protected by U.S. Patent Number(s) 6,046,572 , 6,222,138 ©... - Page 11 Tail Cap Lanyard Ring Lanyard, Black Tail Cap Lanyard Kit Spares Carrier Hurricane™ Emergency Battery Pack Light (includes 12 each SF123A) Custom Engraving: Engraving of name, logo, slogan or other icons is available to personalize your SUREFIRE product. Call Customer Service.