Related Manuals for Surefire LumaMax L2
Summary of Contents for Surefire LumaMax L2
- Page 1 Model L2 L2 LumaMax™ LED Flashlight Operator’s Manual Digitally-Controlled 5-Watt LED Flashlight Revision N/C 2-1-2004...
- Page 2 The L2 LumaMax is fitted with a 5-watt white LED module. Powered by two 3-volt 123A lithium batteries, the L2 features digital current regulation circuitry that matches the LED’s current requirements to the batteries’ output to achieve a consistent level of light output for the useable life of the batteries.
-
Page 3: Operation
Clean and lubricate threads with a clean cloth and apply thin coat of silicon-based lubricant to rubber O-rings. Note: Do not use petroleum-based lubrication on SureFire O-rings. After prolonged exposure to moisture, the bezel and batteries should be removed, inspected, and dried if necessary. This unit has... - Page 4 SureFire ® LED HEAD ASSEMBLY FLASHLIGHT BODY LOCK-OUT MARK SF123A BATTERIES TAILCAP LOCK-OUT MARK PUSHBUTTON SWITCH...
- Page 5 Accurately specifying light output (lumens) and runtime is more complicated for LED flashlights than it is for tungsten lamp flashlights. The light output of the L2 exceeds that of comparable SureFire tungsten lamp flashlights (6P, C2, E2e, etc.). SureFire L2...
- Page 6 ® from defects in materials and workmanship. SureFire will repair or replace, at its option without charge, any product or part which is found to be defective under normal use and service. Such repair or replacement shall be the purchaser’s sole and exclusive remedy...