Table of Contents
Advertisement
TG7511_7521BX(e).book Page 52 Tuesday, June 15, 2010 2:10 PM
Useful Information
Answering system (KX-TG7521)
Problem
Cause/solution
The unit does not
L The answering system is turned off. Turn it on (page
record new messages.
L The message memory is full. Erase unnecessary
L The recording time is set to "Greeting Only".
L If your own greeting message is not recorded properly,
L If you subscribe to a voice mail service, messages are
My own greeting
L Record your own greeting message again (page 38).
message cannot be
properly heard.
I cannot operate the
L Someone is using the unit. Wait for the other user to
answering system.
L A caller is leaving a message. Wait for the caller to
L The handset is too far from the base unit. Move closer.
I cannot operate the
L The remote access code is not set. Set the remote
answering system
remotely.
L You are entering the wrong remote access code. If you
L Press each key firmly.
L The answering system is turned off. Turn it on (page
52
37).
messages (page 38).
Change the setting (page 42).
callers are unable to leave a message. Record your
own greeting message again (page 38).
recorded by your service provider/telephone company,
not your telephone. Change the unit's number of rings
setting or contact your service provider/telephone
company (page 41).
finish.
finish.
access code (page 40).
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 40).
41).
Advertisement
Table of Contents
