Table of Contents
Advertisement
TG7511_7521BX(e).book Page 51 Tuesday, June 15, 2010 2:10 PM
Problem
Cause/solution
Caller information is
L Depending on your service provider/telephone
slow to display.
L Move closer to the base unit.
Time on the unit has
L Incorrect time information from incoming Caller ID
shifted.
The name stored in the
L Edit the phonebook entry name to fit in 1 line of text
phonebook is not fully
displayed while an
outside call is being
received.
SMS (Short Message Service)
Problem
Cause/solution
The SMS message
L Someone tried to send you a message while SMS is
centre number is
logged in the caller list
and the message is
not received.
I cannot send or
L You have not subscribed to the appropriate service.
receive SMS
messages.
L The SMS message centre number(s) are not stored or
L Message transmission was interrupted. Wait until the
L If you use a DSL/ADSL service, we recommend
"FD" is displayed.
L The unit could not connect to the SMS message
"FE" is displayed.
L An error occurred while sending the message. Try
"E0" is displayed.
L Your phone number is permanently withheld or you
company, the unit may display the caller's information
at the 2nd ring or later.
changes the time. Set the time adjustment to
"Manual" (off) (page 23).
(page 20).
turned off. Turn it on (page 34).
Contact your service provider/telephone company.
are incorrect. Store the correct numbers (page 34).
message has been sent before using other telephone
functions.
connecting a DSL/ADSL filter between the base unit
and the telephone line jack. Contact your DSL/ADSL
provider for details.
centre. Confirm that the correct SMS message centre
numbers are stored. Confirm that SMS is turned on
(page 34).
again.
have not subscribed to the appropriate service.
Contact your service provider/telephone company.
Useful Information
51
Advertisement
Table of Contents
