VI.
Component Access/Replacement
VI.
Component Access/Replacement
Door Latches
Door Latches
To remove & install door latches for integrated models (continued):
Remove door latch from console.
Disconnect wire harness, then remove microswitch & cover.
Disconnect wires, then remove microswitch from cover.
Replace microswitch, then reassemble.
Remove door latch
Replace cover (in slots) Insert latch into tabs
Replace fascia panel
–
Removal & Installation (2)
–
Removal & Installation (2)
Remove microswitch
Replace screws
56
Microswitch
Bend tabs back
Make sure
HINT:
metal console tabs
are
bent
back
completely
during
reassembly.