To Separate Base From Tank - Bosch SHI4302 Manual

VI. Component Access/Replacement
VI. Component Access/Replacement
Heaters &
Heaters &

To separate base from tank (1):

Carefully lay dishwasher on its back.
Carefully pull door springs out from base.
Remove terminal blocks from base.
Separate water valve from base by
removing two (2) T-20 Torx screws, then
move water valve out of the way.
Place on back
Disconnect door spring cords, then
Disconnect water valve from base
NTC's – Access (3)
NTC's – Access (3)
Pull out door springs from base & disconnect cords
remove terminal blocks from base
48
Remove water
HINT:
from sump and hoses
before laying dishwasher
on its back (to avoid
water entering water fill
assembly & causing
faulty water filling).