Avaya P333T-PWR Quick Start For Hardware Installation page 31

To run the Device Manager:
1. Open your browser.
2. Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.
- The user name is "root".
- The default password for read-only access is "root".
- The default passwords for read-write access is "root".
Note:
The P330 Device Manager passwords are the same as those of the CLI. If you
Note:
change the passwords of the CLI then those passwords become active for the
Device Manager as well. For further information on the passwords, refer to the
Avaya P330 Installation and Configuration User Guide.
The welcome page is displayed.
Figure 7: The Welcome Page
If you have the Java plug-in installed, the Device Manager automatically opens in a new
window, shown in Figure 8.
Running the Device Manager
Issue 1 September 2005 29