Avaya P333T-PWR Quick Start For Hardware Installation page 27

For further information, please refer to Chapter 6 of the Avaya P333T-PWR User's Guide.
The default settings for the Avaya P333T-PWR switch and its ports are determined by the
Avaya P333T-PWR firmware. These default settings are subject to change in newer versions of
the Avaya P333T-PWR firmware. See the P330 Release Notes for the most up-to-date settings.
Table 6: Default Switch Settings
Function
IP address
BootP mode
Subnet Mask
Default gateway
Management PC SLIP IP Address
Management VLAN ID
Spanning tree
TFTP Mode
TFTP Server
TFTP File Name
SNMPv1 communities:
Read-only
Read-write
Trap SNMP
SNMP authentication trap
CLI timeout
User Name/Password
Configuring the Switch
Default Setting
149.49.32.134
Never
255.255.255.0
0.0.0.0
192.168.10.2
1
Enabled
Limited
0.0.0.0
viisa
Public
Public
Public
Disabled
15 Minutes
root/root
Issue 1 September 2005 25