Prepare for Configuration
Table 7: Default Port Settings
Parameter
Port speed and duplex mode
Flow Control
Backpressure
Auto-negotiation
Administration State
Port VLAN ID
Tagging mode
Port priority
Inline power
Inline power priority
Tip:
Functions operate in their default settings unless configured otherwise.
Tip:
26 Quick Start for Hardware Installation: P333T-PWR Stackable Switch
Default Setting
10/100-TX ports: Auto-negotiation
●
100Base-FXports:100 Mbps full duplex
●
1000Base-X ports: 1000 Mbps full duplex
●
10/100 and 100 Mbps: Disabled
●
1000 Mbps: Disabled (no pause)
●
10/100: Enabled (when in half duplex mode)
●
100Base-FX &1000 Mbps: Not applicable
●
10/100-TX ports: Enabled
●
100Base-FX ports: Not applicable
●
1000Base-X ports: Enabled
●
Enabled
1
Clear
Regular
Enabled
Low