Table of Contents
Advertisement
REMOTE CONTROL UNIT
1
POWER
Press to turn the MONITOR on and off.
2
CH1 (
)
CH1 button enables the camera 1 to be displayed in a
single mode.
3
CH2 (
)
CH2 button enables the camera 2 to be displayed in a
single mode.
4
CH3 (
)
CH3 button enables the camera 3 to be displayed in a
single mode. Also used to highlight selections on the
system main menus.
5
CH4 (
)
CH4 button enables the camera 4 to be displayed in a
single mode.
Also used to highlight selections on the system main
menus.
6
VCR
Press this button to display the picture of VCR playback.
7
RECORD
Used in the built-in Quad monitor only.
8
LIVE/PB
Used in the Mux monitor only
9
PLAY
Press this button to display the picture of VCR playback.
10
RB THRU
Used in the Mux monitor only
11
FREEZE
Press this button to stop the image temporarily.
INSERTING THE BATTERIES IN THE REMOTE CONTROLLER
You must insert or replace the batteries in the remote controller when you:
Purchase the set. (AAA size 1.5V
Find that the remote controller is no longer operating correctly.
Remove the cover of the remote
1
controller by pressing the symbol and
pulling the cover space in the
direction of the arrow.
!
You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left and right sides of the remote controller receptor of your monitor.
12
QUAD/MULTI
Used in the quad display monitor only
13
MENU(SYSTEM)
Display the system main menu on the screen.
You can set up CAM INPUT SET, CH_TITLE SET,
DATE/TIME SET, AUTO SWITCH SET, REC TYPE SET
ALARM/LOSS SET and ALARM/LOSS LIST.
14
VOLUME UP
Press to increase the volume level. Also used to
select items on the on-screen picture menu.
15
ENTER/P.T
If this key is pressed, the system goes to the PAN/TILT
control mode, and then you can change the camera view
position by pressing the up/down, right/left button.
16
P.MENU (PICTURE MENU)
Display the Picture Menu on the screen.
You can set up CONTRAST, BRIGHTNESS, COLOR,
TINT(NTSC only) and SHARPNESS.
17
VOLUME DOWN
Press to decrease the volume level. Also used to
select items on the on-screen picture menu.
18
ACTION
It switches the internal relay to put on.
19
ZOOM
Zoom in on the picture in LIVE MODE &PLAY BACK
MODE.
20
AUTO
This button makes the quad processor switched the signal
sources to be displayed sequentially.
2)
Insert 2 batteries(AAA size),
2
taking care to respect the polarities.
Replace the cover by pushing it in the
3
direction of the arrow.
12
Advertisement
Table of Contents
