Adjusting Contrast; Making N In 1 Copies - Brother DCP-7030 User Manual

Chapter 4

Adjusting contrast

Contrast
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a
Load your document.
b
Enter the number of copies you want.
c
Press Contrast.
d
Press a or b to increase or decrease the
contrast.
Press OK.
e
Press Start.
To change the default setting follow the steps
below:
a
Press Menu.
b
Press a or b to choose 2.Copy.
Press OK.
c
Press a or b to choose 2.Contrast.
Press OK.
d
Press a or b to increase or decrease the
contrast.
Press OK.
e
Press Stop/Exit.
26

Making N in 1 copies

4
(page layout)
You can reduce the amount of paper used
4
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
Important
Please make sure the paper size is set to
Letter or A4 (Legal or Folio for Asia).
(P) means Portrait and (L) means
Landscape.
You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Load your document.
b
Enter the number of copies you want.
c
Press Options.
d
Press a or b to choose Page Layout.
Press OK.
e
Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
f
Press Start to scan the page.
(DCP-7040 only) If you placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to g.
g
After the machine scans the page,
press a to scan the next page.
Next Page?
a Yes b No
h
Put the next page on the scanner glass.
Press OK.
Repeat g and h for each page of the
layout.
4
4