Cleaning The Drum Unit - Brother DCP-7030 User Manual

Cleaning the drum unit

If you have print quality problems, clean the
drum unit as follows.
a
Turn off the machine. Disconnect all
cables, and then unplug the power cord
from the electrical socket.
b
Open the front cover.
c
Slowly take out the drum unit and toner
cartridge assembly.
CAUTION
We recommend that you put the drum unit
and toner cartridge assembly on a clean,
flat surface with a sheet of disposable
paper or cloth underneath it in case you
accidentally spill or scatter toner.
Troubleshooting and routine maintenance
B
To prevent damage to the machine caused
by static electricity, DO NOT touch the
electrodes shown in the illustration.
d
Push down the green lock lever and take
the toner cartridge out of the drum unit.
CAUTION
Handle the toner cartridge carefully. If toner
scatters on your hands or clothes, wipe or
wash it off with cold water at once.
To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations below.
B
69