Sennheiser DW Series User Manual page 43

Manufacturer Declarations
42 | DW Series - User Guide
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital equipment complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment. Before putting the equipment into operation, please
observe the respective country-specific regulations!
The headsets DW 10 HS/DW 20 HS/DW 30 HS comply with Industry
Canada RF radiation exposure limits for devices used by the general public.
They have been tested for SAR and have complied with Industry Canada
SAR limits for devices used by the general public.
Trademarks
Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co.
KG.
Other product and company names mentioned in this instruction manual
may be the trademarks or registered trademarks of their respective
owners.