Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ace Plus EX-G028A
Summary of Contents for Ace Plus EX-G028A
-
Page 1: User Manual
ACE PLUS CORP. VGA over Single CAT5 Series EX-G028A VGA over CAT5 Extender User Manual Page 1 of 8 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com... - Page 2 However, like all electronic equipments, the EX-G028A should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Page 3 ACE PLUS CORP. Introduction With only one cost effective CAT-5e cable, the EX-G028A lets you extend VGA (WUXGA) to cover the distance up to 330m (1,000ft). The devices are composed of a transmitter and a receiver. The transmitter EX-G028A-TX is installed near the signal source, and the receiver EX-G028A-RX is placed near the desired display.
- Page 4 0~40°C [32~104°F] temperature Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] 1x EX-G028A or EX-G028B [TX &RX] Package Contents 2x 5V power adapter 1x User Manual Page 4 of 8 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,...
- Page 5 ACE PLUS CORP. Panel Descriptions Front Panel — Transmitting unit (EX-G028A-TX) 1. +5V DC power jack: Connect to 5V DC power supply 2. VGA IN: VGA input from a video source Rear Panel —Transmitting unit (EX-G028A-TX) 3. RJ-45 OUT: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the receiving unit EX-G028A-RX.
- Page 6 ACE PLUS CORP. Front Panel — Receiving unit (EX-G028A-RX) 4. +5V DC power jack: Connect to 5V DC power supply 5. VGA OUT: VGA output to a monitor Rear Panel —Receiving unit (EX-G028A-RX) 6. RJ-45 OUT: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit EX-G028A-TX.
- Page 7 ACE PLUS CORP. Hardware Installation 1. Connect your VGA source to the transmitting unit. 2. Connect your display to the receiving unit. 3. Connect your CAT-5/5e/6 cable between the transmitting and receiving units. 4. Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
- Page 8 Please use EIA/TIA-568-B termination (T568B) at any time Limited Warranty The SELLER warrants the EX-G028A VGA over CAT5 Extender to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.
Need help?
Do you have a question about the EX-G028A and is the answer not in the manual?
Questions and answers