SOLTEK SL-65EP-T User Manual page 73

Chapter 4 BIOS Setup
Onboard Serial Select a logical COM port name and matching
Port 1 / Port 2 address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
UART Mode Select The second serial port on your system may offer
a variety of infrared port modes. Click here for a
description of various modes. (Click your
browser 's Back button, or your right mouse
button, to return to this page.)
The choices: Standard; HPSIR; ASKIR
UR2 Duplex Mode This item allows you to select the IR half / full
duplex function.
The choices: Half; Full.
Onboard Parallel Port This item allows you to determine onboard parallel
port controller I/O address setting.
The choices: 378H/IRQ7; 278H/IRQ5; 3BC/IRQ7;
Disabled.
Parallel Port Mode Select an operating mode for the on-board parallel
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
ECP Mode Use DMA Select a DMA channel for the port.
PWRON After PWR- Off: Disable Power Lost Resume function.
Fail On: Enable Power Lost Resume function.
Former Sts: Use Former status.
The choices: Off; On; Former Sts.
Game Port Address This item allows you to select the Game Port
Address.
The choices: Disable; 201; 209
73