Using The Pc Settings; Regza-Link Connection; Adjusting The Picture Position - Toshiba 40XV700A Owner's Manual

Using the PC Settings

• Most of the picture controls and functions are available
in both digital and analogue modes� However, features
not available will be greyed out�
• First, press o to display the video input mode list, and
then press s or r and Q in order to select PC input
mode ( - page 30)�
• The PC Settings function may not be available for some
signals and when no signal is received�
• In certain cases, it may be difficult to optimally set the
clock phase and sampling clock values depending on the
input signal type�

Adjusting the picture position

1
From the Display Settings in the PREFERENCES
menu, press s or r to select PC Settings �
Display Settings
Auto Format
4:3 Stretch
Picture Position
PC Settings
2
Press Q to display the PC Settings menu�
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Reset
3
Press s or r to select the option you want to adjust�
Press v or w to adjust the settings as desired�
Horizontal Position
Adjusting the clock phase of the picture
If the clock phase, which synchronizes the PC signal and
LCD display, is not optimized, the picture will blur.
This function allows you to adjust clock phase and display
a clear picture�
1
From the PC Settings menu, press s or r to select
Clock Phase �
2
Press v or w to obtain a clear picture�
Clock Phase
44
Connecting your TV
On
Off
0
0
0
0
0
0
Adjusting the sampling clock
If the sampling clock does not match with the dot clock
frequency of the PC, picture details will be blurred, screen
width will change, or drift patterns in vertical lines may be
apparent�
This function allows you to adjust and optimize the
picture�
1
From the PC Settings menu, press s or r to select
Sampling Clock �
2
Press v or w to optimize the picture.
Sampling Clock
Resetting the PC Settings
The Reset function adjusts the PC Settings to the factory
settings�
1
From the PC Settings menu, press s or r to select
Reset �
2
Press Q �
Note:
When a PC is connected using HDMI, none of these
functions will be available.

REGZA-LINK connection

You can control the basic functions of connected audio/
video devices using the TV's remote control if you connect
a REGZA-LINK compatible audio receiver or playback
device� For an explanation of setup and operations
( - pages 32, 33)�
Before controlling the device(s):
• After completing the above connections, set the
REGZA-LINK Setup menu as you desire ( - page 33)�
• The connected devices must also be set. For details, see
the owner's manual for each device�
0