Toshiba 40XV700A Owner's Manual page 23

• PC mode is available in RGB/PC input mode or
HDMI input mode.
• The picture mode you select affects the current
input only. You can select a different picture mode
for each input.
1
From the PICTURE menu, press the s or r to
select Picture Mode
PICTURE
Picture Mode
Reset
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
2
Press v or w to select the Picture Mode you prefer
and press Q �
Activating the picture preferences
You can customise current Picture Mode settings as
desired� For example, while selecting " Dynamic ," if
you change the following items, such as Backlight ,
Contrast , Brightness , Colour , Tint , Sharpness
and the Advanced Picture Settings items, your new
setting are saved for " Dynamic " Picture Mode �
1
From the PICTURE menu, press s or r to select
either Backlight , Contrast , Brightness , Colour ,
Tint or Sharpness �
2
Press v or w to adjust the settings�
Note:
Contrast are not available when Picture Mode is
set to AutoView.
Resetting the Picture Mode
This feature resets all picture settings to the factory
settings Picture Mode �
Note:
If no picture settings have been changed, Reset is
not available.
1
From the PICTURE menu, press s or r to select
Reset , and then press Q �
2
A confirmation message will appear. Press v or w to
select Yes , and then press Q �
Adjusting Black/White Level
Black/White Level improves the contrast of the picture�
1
From the PICTURE menu, press s or r until
Advanced Picture Settings is selected�
Using the TV's features (General)
Standard
70
100
0
0
0
0
PICTURE
Reset
PICTURE
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced Picture Settings
2
Press Q , and then press s or r to select Black/
White Level �
Advanced Picture Settings
3D Colour Management
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor Settings
LED Backlight Control
Black/White Level
Static Gamma
Noise Reduction
3
Press v or w to adjust the settings as required�
Using ClearFrame 100Hz
This function eliminates motion blur without adding
flicker or reducing image brightness and improves the
viewing quality of a motion picture�
1
From the Advanced Picture Settings menu, press
s or r until ClearFrame 100Hz is selected�
2
Press v or w to select On or Off �
Adjusting Film Stabilization
The Film Stabilization function improves motion
smoothness�
1
From the Advanced Picture Settings menu, press
s or r until Film Stabilization is selected�
2
Press v or w to select Off , Smooth or Standard �
Adjusting the Colour Temperature
Colour Temperature increases the 'warmth' or
'coolness' of the picture by increasing the red or blue tint�
1
From the Advanced Picture Settings menu, press
s or r to select Colour Temperature , and then
press Q �
2
Press v or w to select the Colour Temperature
setting (0 (warm) - 10 (cool))�
0
70
100
0
0
0
0
Off
100
Middle
7
0
23