Connecting Your Tv; Back Connections; Connection Example; Connecting An Amplifier Equipped With A Dolby Digital Decoder - Toshiba 40XV700A Owner's Manual

Back connections

Connection example

Back of TV
3 1 4
COMPONENT COMPONENT
VIDEO INPUT VIDEO INPUT
Y Y
S-VIDEO
WOOFER PC/HDMI 3
(VARIABLE) (AUDIO)
P B /C B P B /C B
VIDEO
P /C P /C
R R R R VIDEO
L
RGB
/PC
AUDIO
R
MONITOR
VCR (Normal) VCR (Recording)
• Before connecting any external equipment, turn off all
main power switches�
• The unauthorized recording of TV programmes, DVDs,
video tapes and other materials may infringe upon the
provisions of copyright law�
• If you connect to both the S-VIDEO input terminal and
VIDEO input terminal, the S-VIDEO signal will appear
on the screen (display changes to o 1S)
• The COMPONENT VIDEO INPUT consists of
three component video signals ( Y , P
provides better picture performance� These terminals
can only be used with component video compatible
equipment e�g� DVD video player, etc�
• Additional equipment and cables shown are not supplied
with this TV�
Selecting the Woofer
Connect an external woofer to the Woofer output terminal
located on the rear of the TV�
1
From the AV Connection menu, press s or r to
select Woofer �
2
Press v or w to select Internal or External �
Internal : Select to use the Dynamic Bass Boost�
External : Select to use an external woofer system�

Connecting an audio system

You can enjoy high quality dynamic sound by connecting
the TV to an audio system�

Connecting your TV

DVD video player
(with component video outputs)
Set Top Box
Woofer system
with amplifier
/C , P /C ) and
B B R R
- digital -
Notes:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
OPTICAL input of a receiver or processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier's
volume to a moderate listening level before turning
on the power. Otherwise, the speakers and your
hearing may be damaged by sudden high volume
audio.
• Turn off the amplifier before you connect or
disconnect the TV's power cord. If you leave the
amplifier power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set PCM
for Digital Output menu (- page 38). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifier equipped with a
Dolby Digital decoder
DIGITAL
AUDIO
Back of TV
To Digital Audio
output terminal
Front speaker Surround speaker
Centre speaker
You can enjoy dynamic realistic sound by connecting the
TV to an amplifier equipped with a Dolby Digital decoder
or Dolby Digital processor� When using this setup, select
Auto in the Digital Output menu�
Amplifier equipped with
Dolby Digital decoder
To Optical type
digital audio input
Optical digital cable
(not supplied)
Sub woofer
Signal flow
39