Setting The Colour System; Setting The External Input Skip - Toshiba 40XV700A Owner's Manual

HDMI ® displays equipment connected to HDMI
inputs on the back or side of the TV�
PC displays a computer connected to the RGB/PC
input on the back of the TV�
2
Press Q �
TV (Digital TV or Analogue TV),
o 1 ( o (1), video 1 input) or o 1S (S-video input),
o 2 ( o (2), video 2 input),
o 3 ( o (3), component video input),
o 4 ( o (4), component video input),
HDMI 1, HDMI 2, HDMI 3, HDMI 4 (HDMI input),
PC ( o RGB/PC, PC input)
Notes:
• When component video, PC, or HDMI input modes
are selected, the MONITOR terminals (- page 40)
output audio signal only.
• If a REGZA-LINK device is connected to an HDMI
input, the REGZA-LINK icon will appear.
• When the TV is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in the
list; when an HDMI cable is removed, it will take a
few minutes for the icon to disappear.
• If the HDMI cable from a connected device or an
HDMI setting for a connected device is changed,
Enable REGZA-LINK in the REGZA-LINK menu
may need to be reset to On.

Setting the Colour System

1
Press MENU , and then press v or w to display the
SETUP menu�
SETUP
Menu Language
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Colour System
Quick Setup
2
Press s or r to select Colour System , and then
press v or w to select Auto , PAL , SECAM , NTSC
4.43 or NTSC 3.58 �
Notes:
• Confirm that colour system is set to "Auto" . If not,
select "Auto" with v
• This feature is available in Standard video
(composite) inputs mode.
Using the TV's features (General)
English
Australia
Antenna
Auto
or w .

Setting the external input skip

This feature is designed to make input selection more
convenient�
1
From the PREFERENCES menu, press s or r
until AV Connection is selected, and then press Q �
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Panel Lock
Display Settings
AV Connection
2
Press s or r to select Input Labeling , and then
press Q �
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
Woofer
Digital Audio Output
3
Press s or r to select the input you want to skip, and
then press the RED button to turn on the skip�
Input Labeling
Input Label
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
4
To turn off the skip, press the RED button again�
The input set to Skip is greyed out in the Input
Selection window and is skipped over when you press
on the remote control�
Auto
Off
PC
Digital
Internal
PCM
--
--
--
--
--
--
--
--
--
31