Programming Channels Into; The Tv's Channel Memory; Auto Tuning - Toshiba 40XV700A Owner's Manual

Notes :
• The same menu is displayed in DTV (Digital TV)
and ATV (Analogue TV) modes; however, some
items are greyed out in each case.
• In video input mode (o1 - o 4 and HDMI), Auto
Tuning, ATV Manual Tuning, DTV Manual Tuning,
Quick Setup and DTV Settings are not available.
(- page 31).
• If you do not make a selection for a while, the menu
display disappears automatically.
• If you want to close the menu display instantly,
press P or MENU.
• To return to the previous menu, press T.
• In PC input mode, PC Settings is available in the
Display Settings menu (- page 44).
• When the 3D Colour Management function is set
to on (- page 24), you can select Base Colour
Adjustment in the Advanced Picture Settings
menu.
Programming channels into the
TV's channel memory

Auto Tuning

Auto Tuning will completely re-tune the TV and can be
used to update the channel list�
It is recommended that Auto Tuning is run periodically
to ensure that all new services are added� All current
channels and settings, e�g� favourites and locked channels,
will be lost�
Note:
As new services are broadcast, it will be necessary
to retune the TV in order to view them.
1
Press MENU , and then press v or w to select the
SETUP menu�
SETUP
Menu Language
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
Location
2
Press s to select Auto Tuning , and then press Q �
A screen will appear warning that previous settings
will be deleted�
16
Getting started
English
Auto
Auto Tuning
Previous settings will be lost! EXIT for no
change.
Tuning Mode
Bandwidth
3
Use v or w to select DTV and ATV , DTV or ATV �
Then, press s to select Start Scan , and then press
Q to continue with the Auto Tuning �
Press s to select Bandwidth , press v or w to select
7MHz, 8MHz or 7MHz and 8MHz ( - page 60)�
The TV will start to search for all available DTV and/
or ATV services�
You must allow the TV to complete the search� When the
search is complete, the Auto Tuning screen will display
the services found�
4
Use s or r to move through the list to select a
channel, and then press Q to view�
ATV Manual Tuning
- analogue -
Use the Manual Tuning operation if desired channels
cannot be preset by Auto Tuning or if you would like to
preset channels to specific position numbers one by one.
1
From the SETUP menu, press s or r to select ATV
Manual Tuning �
2
Press Q to display the ATV Manual Tuning menu�
Press r or s to select the position you want to set�
ATV Manual Tuning
Pos.
1
2
3
4
5
6
7
8
3
Press Q to display the settings menu� Press v or w
to select an item, and then press r or s to set the
item as shown below�
ATV Manual Tuning
Position
1 B/G A
A C E
B D
A. Position selection
B. System (Sound)
B/G , D/K , I or M
DTV and ATV
7MHz
Start Scan
Label
0
G
F