System Information And Reset Tv; System Information; Reset Tv; Pc Settings - Toshiba REGZA YL76 Series Manual

CONTROLS AND FEATURES
System Information and

Reset TV

System Information

This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
In the SETUP menu, press
Information is highlighted.
b
Press OK to display the System Information.
System Information
2.1.26.0 Feb 19 2010 - 15:56:50 FW:13
WEAK
Ch25
c
For information about the signal quality of a particular
B
multiplex, press or
d
Press OK for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the SETUP menu, press
highlighted.
b
Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup screen
will appear. Press OK to advance the setup and
perform an auto tune. (See 'Quick Setup' section on
page 16.)
B b
or until System
TOSHIBA
2010
AVERAGE STRONG
Good
b
to select that multiplex.
b
until Reset TV is

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the 'Connecting a computer'
section) and ensure that a picture is showing on the television
screen. The picture position may now be adjusted to suit
personal preference.
a
In the PREFERENCES menu, press
Display Settings and press OK.
b
In the Display Settings menu, press
Settings is highlighted.
Display Settings
Auto Format
4:3 Stretch
PC Settings
c
Press OK. Press
c
or to adjust the settings.
PC Settings
Horizontal Position
Vertical Position

Clock Phase

Sampling Clock
The Clock Phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a
In the Display Settings menu, press
Settings is highlighted.
b
Press OK to select, and then
Phase.
c
C c
Use or to adjust until the picture clears.
70
B b
or
b
until PC
On
Off
B b
and to select an option, then
0
0
0
0
Reset
Clock Phase
b
until PC
b
to highlight Clock
to highlight
C