Colour System - Toshiba 32ZT29B Owner's Manual

Q
I have a picture, but why have I no sound?
A
Press the volume button
k button.
Check the Languages option in the
Choose English Audio.
Q
Why am I not receiving a clear analogue picture?
A
You may be experiencing interference or a weak
signal. First, try a different station and check your
aerial connections. Then you can fine tune, press the TV
MENU button and select
tuning screen highlight the channel and press SELECT.
Use the S or R buttons to select
and adjust/optimise the picture with the P and
Q buttons.
Q
Why are the colours wrong when I play an NTSC source?
A
Connect the source via a Scart lead and play.
From the Set up menu select Colour. With the
1
S or R button choose AUTO and then EXIT.
Now, go to the Picture
2
S or R button, adjust the Tint.
Q
Why don't the controls on the front of the TV work?
A Check that Panel lock
control select Panel lock
With the S or R buttons turn
Q
Why don't the
A You have no programmes chosen as Favourites.
From the digital MAIN MENU
Highlight the programme(s) and with the S and R buttons
turn Favourite to Yes.
You have Programme skip :
TV MENU.
FOR YOUR GUIDANCE
Q
uestions
A
nswers
+ j –
or the sound mute
SET UP MENU.
Set up. From the Manual
Manual fine tuning
menu and with the
is not ON: using the remote
from the Feature menu.
Panel lock OFF.
buttons work?
f f e e
P
select Service List.
On in the Manual tuning
and
...
continued
Q
Why doesn't the remote control work?
A
Check that the switch on the side of the remote
control is set to TV mode.
Check that the batteries aren't dead and that they are
inserted correctly.
Q
Why is there no sound coming from the front speakers?
A Change the setting of the speaker switch on the
back of the TV.
Q
Why is there no Dolby Surround?
A If you are unable to obtain surround sound effects
from the rear speakers whilst playing a Dolby
Surround video tape, check that the video recorder is a
stereo unit and that it is connected to the TV by means of
one of the 21-pin Scart sockets.
Also check that Rear speaker
set up menu is set to YES and check you have the correct
Dolby mode.
Run the Surround test
Pro Logic section of this manual.
Q
Why is the analogue teletext not very good?
A Good text performance depends on a strong
broadcast signal. This normally requires a roof or
loft aerial. If the text is unreadable, check your aerial.
Also, go to the main index page of teletext and look for
the User Guide. This will give you details of basic teletext
operation. If you need further help, see the analogue
teletext section in this manual.
Q
Why do I not have any analogue teletext sub-pages?
A
There are none broadcast or they have not yet
loaded. Press the
analogue teletext section.
Q
A
There is none broadcast at this time, try later or use
analogue text in the meantime.
39
option in the Surround
mode as described in the Dolby
( ) button to access. See the
B
X
Why is there no digital teletext?