OPTIONAL ADD ON RECEIVER/TRANSMITTER KIT
The transmitters are pre-programmed from the factory, if you find you need to
program new or additional transmitters follow the instructions below.
PROGRAMMING BANK 1
TRANSMITTER PROGRAMMING/OPTIONAL ADDP1 or ADDSS
Transmitter Model Name Is Found On Back Of Transmitter Case
1. Turn the ignition key to the on position.
2. Press and release the valet/programming switch 3 times (Siren Chirps).
3. Press the Start Button of each transmitter you want programmed until you
hear a chirp from the horn or siren.
4. Turn the ignition switch off.
The above action programs Start function for the system. Test your system
by pressing the start button of the transmitter two times in succession.
Page 19
128-8970a
19 of 20