Char-Broil American Gourmet 600 Series 12301565 Product Manual page 10

5
Insert a small Hitch Pin Clip into the hole at one end of the axle and bend the ends of the pin back so that it cannot be removed.
Slide a wheel onto the axle. Slide the axle through the holes at the ends of the short legs. Slide the remaining wheel onto the axle
and secure with the remaining Hitch Pin Clip.
Finally, Push the wheel end caps onto each end of the axle.
Small Hitch
Pin Clip
6
Place the firebox onto the cart. The butterfly
damper should be on your right hand side over
wheels. Insert 4 each 1/4-20X1 3/4" screws
through cart and firebox. Secure the firebox
using 4 each 1/4-20 flange nuts. Insert screws
from outside, flange nuts from inside chamber.
FULLY TIGHTEN ALL SCREWS AND NUTS
AT THIS TIME.
Page 10
Small Hitch Pin Clip
1/4-20x1 3/4" Screw
"Cone" side of wheel against leg
Wheel End Cap
1/4-20 Flange Nut