Ipi Module Reset Switch - Heat & Glo SOHO-B-CEB Owner's Manual

G. IPI Module Reset Switch
The appliance is shipped with the IPI reset switch
installed and positioned to work with the DF-SOHOCE-
BK decorative front. If using the Studio front, the switch
assembly should be re-positioned as shown below; this
will keep the switch accessible during fireplace opera-
tion. Ensure that no wires are damaged or disconnected
during the re-positioning process.
1. Remove two screws securing the switch assembly to the
fireplace. See Figure 14.10.
TWO SCREWS
Figure 14.10
2. Bend metal bracket as indicated in Figure 14.11.
Figure 14.11
60
Bend at location shown
Heat & Glo • SOHO-B-CEB, SOHO-N-CEB, SOHO-P-CEB • 2111-980 Rev. i • 3/13
3. Position and secure the switch assembly to the lower
right side of the surround as shown below. It should
be placed directly against the surround face or finishing
materials. See Figure 14.12.
Figure 14.12
.
Position flat against
surround face and
secure with two screws.