Troubleshooting - Bounty Hunter Quick Silver Owner's Manual

TROUBLESHOOTING

SYMPTOM
Detector chatters
or beeps erratically
Constant low tone
or constant repeating • Wrong type of
tones
LCD does not lock
on to one target ID
or detector emits
multiple tones
No power, no
sounds
TROUBLESHOOTING GUIDE
CAUSE
• Using detector
indoors
• Using detector near • Move away
power lines
• Using 2 detectors in • Keep 2 detectors
close proximity
• Highly oxidized
buried object
• Environmental
electromagnetic
interference
• Discharged batteries • Replace batteries
batteries
• Multiple targets
present
• Highly oxidized
target
• Sensitivity set
too high
• Dead batteries
• Cord not connected • Check connections
securely
• Not moving
Search Coil
SOLUTION
• Use detector
outdoors only
from power lines
at least 30' apart
• Only dig up
repeatable
signals
• Reduce sensitivity
until erratic
signals cease
• Use only 9V
alkaline batteries
• Move coil slowly
at different angles
• Reduce sensitivity
• Replace batteries
• Sweep search coil
from side-to-side
17