TROUBLESHOOTING
SYMPTOM
No power, no
sounds
Detector chatters
or Beeps Erratically
Detector Beeps at End
of Sweeps
(false signals)
Many False Signals in
the Field
TROUBLE SHOOTING GUIDE
CAUSE
• Dead batteries
• Cord not
connected properly
• Electromagnetic
Interference
• Using Indoors
• Using Near Another
Metal Detector
• Wrong Type of Batteries • Use 9-Volt ALKALINE
• Sensitivity Set Too High • Reduce Sensitivity
for Environment
• Improper Sweep
Technique – Swinging
Coil Like a Pendulum
• Detector Not Ground
Balanced Correctly
• Sensitivity Too High
• Oxidized Targets
SOLUTION
• Replace batteries
• Check
connections
• Stay away from
Power line,
operating machinery
• Use Outdoors Only
• Keep 2 detectors at
least 20 feet apart
batteries only
• Sweep Coil Parallel to
Ground
• Ground Balance
Detector per Pg. 8
instruction
• Reduce Sensitivity
• Only Dig Up
Repeatable Signals
• Increase
Discrimination Level
(turn control 100%
clockwise)
13