Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bounty Hunter Guardian S3019
Summary of Contents for Bounty Hunter Guardian S3019
- Page 1 OPERATING MANUAL The Guardian ® Hand Held Security Metal Detector...
- Page 2 OPERATOR DETECTION ALERTS INTERFERENCE ELIMINATION FEATURES • Audio Alert – High Pitch Sound • 3 Operating Frequency Selections • Vibration Alert - Silent Operation • Minimize electromagnetic interference from other devices • LED Target Indicator - Red COMFORT GRIP MOMENTARY LOW OPERATION •...
- Page 3 b) Large environmental metal objects, such as the metal reinforcing bars in floors, will not be detected beyond a range of several inches. Upon release of the "Momentary Low" switch, the detector will return to Normal Operation. 4. Silent Operation Position the Silent/Audio switch in the "Silent/Vibrate"...
- Page 4 First Time Operation To Operate the Detector, 1) Install the Batteries a. Use a 9-volt ALKALINE battery only (battery not included) b. Install battery with correct polarity (align "+" on detector housing with "+" on battery) c. The battery cover opens and closes with a coin or screwdriver 2) Set the On switch to "ON"...
- Page 5 Batteries Use 9-Volt ALKALINE battery only (battery not included) Low Battery Alert The Yellow LED indicator light will illuminate and remain illuminated before the batteries are discharged to the point at which the detector has lost any of its metal detecting range.
- Page 6 Power Switch with Momentary Low The Power switch has 2 "ON" positions and a forward "OFF" position. The detector is OFF with the switch in the "UP" position The detector is ON with the switch in the "MIDDLE" position Momentary The detector is in MOMENTARY LOW operation with the switch held in the "DOWN"...
- Page 7 Body Scanning for the Detection of Metal Objects Always test the detector before operation. Sweep the detector across a known metal object, and verify detection with audio, vibratory and visual feedback. Motion is Required: The metal detector must be IN MOTION, sweeping across the target area, to detect the presence of metal.
Need help?
Do you have a question about the Guardian S3019 and is the answer not in the manual?
Questions and answers