Name and Function of Each Section
Bottom
Tripod Mounting Hole
Used to install the camera on an optional
tripod. The tripod must be equipped with
the screw specified as shown below.
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
Tripod Mounting Bracket
You can remove and install this bracket on the top
of the camera. You must use the supplied screw
or the equivalent (within 6mm). If not, the bracket
may not be fixed properly.
12
COLOR CCD CAMERA
L
User's Manual
Back
Power LED
The LED turns on
when power is supplied.
Frame Ground
AC / DC Power Terminal
Used to connect an AC 24V or DC 12V power source.
Menu Setup Buttons
• SET Button: Used to access menu mode. Also used to confirm the setting.
• UP/DOWN Button: Used to choose the desired menu item. It also moves
the cursor up or down in the menu screen.
• LEFT/RIGHT Button: Used to change the parameter of the selected menu item.
It also moves the cursor the left or right in the menu screen.
COLOR CCD CAMERA
Video Output Jack
Used to connect an external
video monitor in jack.
Remote Jack
Used to connect a
remote plug.
MD Output Terminal
Used to output motion
detection signal.
13
User's Manual