Table of Contents
Advertisement
Operating Your Camera
Notes
Tips on Using the Motion Detection Feature
• As you increase or decrease MD LEVEL, the areas' sensitivity is increased or
decreased for object.
• After selecting zone and sensitivity, perform a test operation to make sure it
works properly.
• If the lighting flickers, the motion detection feature might not work properly.
• The object should occupy 10% or more of its zone. The bigger the object, the
higher sensitivity.
• If the brightness of an object changes rapidly by sudden lighting change, the
camera may detect it as a motion.
• Your camera can count up to 999. If you reset your camera with selecting
'RESET' in SPECIAL menu or turn it off and on, your camera'll count up from 0.
• When this feature is activated, another algorithm may take more time to be operated.
• This system does not guarantee prevention of fires or thefts. The manufacturer
is not responsible for any accident or damage.
• You can use the MD output terminal jack on the rear of the camera to connect
an external alarm device. For details, see page 33.
IRIS LEVEL CONTROL
You can control the brightness of the screen.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'IRIS' using the UP or DOWN button and press SET button.
2. Set 'LEVEL' to the desired brightness using LEFT or RIGHT button.
26
COLOR CCD CAMERA
User's Manual
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
IRIS
SHUTTER
3. When completed move the arrow indicator to 'END' and press the SET button.
SHUTTER SPEED CONTROL
You can control brightness of the screen by the shutter speed.
1. Press the SET button to display the setup menu and move the arrow
indicator to 'SHUTTER' using the UP or DOWN button.
2. Set 'SHUTTER' to the desired mode using the LEFT or RIGHT button.
OFF: Deactivation
1/100(1/120: PAL Models): Flickerless mode (
can flicker a little
MANUAL: When setting shutter speed manually
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
IRIS
SHUTTER
SENSE UP
3. If you choose 'MANUAL', select the optimal shutter speed.
• You can select speed from '1/60' to '1/200,000'sec (NTSC Models), '1/50'
to '1/200,000'sec (PAL Models).
• When the shutter speed is increased or decreased using the LEFT or RIGHT
button, you can find the difference by monitoring the brightness of the screen.
COLOR CCD CAMERA
OFF
WDR
W-ATW
OFF
LEVEL
OFF
When WDR is on, the image
)
OFF
WDR
W-ATW
OFF
LEVEL
OFF
OFF
27
User's Manual
Advertisement
Table of Contents
