SCC-C6323 SCC-C6325 SCC-C7325 10x Mini Smart Dome Camera user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register...
fi re or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
Page 3
Safety information CAUTION Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
Product & Accessories Parts Name & Functions Installation DIP Switch Setup Installation using Surface mount on the Ceiling Installation using Ceiling Mount Bracket (SCC-C7325) Installation using Wall Mount Bracket (SCC-C7325) Cabling Operation Check points before operation Preset and Pattern Function Pre-Check...
Page 6
Contents How to use OSD Menu Privacy Zone Mask Setup ❖ Motion Setup Function Setup PRESET Setup Auto Pan Setup Pattern Setup Scan Setup Schedule Setup Camera Setup ❖ System Setup System Initialize Specifi cations Specifi cations Dimension ❖ 6 – 10X MINI SMART DOME CAMERA...
Various Focus Mode: Auto-Focus / Manual Focus cameras can be controlled at the same time. / Semi-Auto Focus. • Pelco-D/ Pelco-P, Samsung protocol can be • Independent or General Camera Characteristic selected as a control protocol in the current Setup in Preset operation version of fi...
Introduction PRODUCT & ACCESSORIES ❖ ❖ Product & Accessories (SCC-C6323) • Main Product Main Body Surface Mount Bracket • Accessory Manual Screw & Plastic Anchor (4Pcs) ❖ Product & Accessories (SCC-C6325) • Main Product Main Body Surface Mount Bracket • Accessory Terminal Block Torx Screw Driver...
Page 9
Introduction ❖ Product & Accessories (SCC-C7325) • Main Product Main Body Sun Shield Housing • Accessory Terminal Block Torx Screw Driver Manual • Mount Bracket Option Wall Mount Bracket (SADT-732WM) Ceiling Mount Bracket (SADT-732CM) English – 9...
Introduction PARTS NAME & FUNCTIONS ❖ ❖ SCC-C6323 Surface Mount Bracket DIP Switch Cable Duct Separating Slit Dome Cover Main Unit / Surface Mount Bracket Back of Main Unit • Surface Mount Bracket • Dome Cover Do not detach protection vinyl from dome cover This is used to install the camera directly on the before fi...
Page 11
Introduction ❖ SCC-C6325 Surface Mount Bracket Mounting Hole Cabling Terminal Main Body Block Lockup Screw DIP Switch Dome Cover Main Unit / Surface Mount Bracket Back of Main Unit • Dome Cover • Lockup Screw Fixes main unit brackets like surface, wall, and Do not remove the protection vinyl from dome cover ceiling.
Page 12
Introduction PARTS NAME & FUNCTIONS ❖ SCC-C7325 Sun Shield Housing Cabling Terminal Main Body Block Lockup Screw DIP Switch Dome Cover Main Unit / Surface Mount Bracket Back of Main Unit ❖ • Dome Cover • Cabling Terminal Block During installation, Power, Video, Communication,...
Samsung • If you set the protocol as Auto Protocol, camera will automatically recognize the kind of Protocol. • Auto Protocol supports Pelco-D and Samsung Protocol. RS-485 • If you want to control using DVR or system Terminate keyboard, their protocol must be identical to ID Setting (1~255) camera.
Installation ❖ RS-485 Termination Resistor Placing lower body to Surface Mount bracket. The cable must be properly handled into hole of bracket or side of lower body. • Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.
Page 15
Installation ❖ Tighten locking screw. SCC-C6325 To pass cables to upside of ceiling, please, make about 60mm hole on the ceiling panel. Screw surface mount bracket to ceiling with 4 screws. Connect Video, communication, power cable properly. (see next section) Wire cables to terminal block and connect the terminal blocks to main unit.
Installation Screw main unit to surface mount bracket with INSTALLATION USING CEILING 4 lock-up screws. MOUNT BRACKET (SCC-C7325) Install ceiling mount bracket on the ceiling using 4 screws provided. Detach protection vinyl from dome cover. Turn sunshield clockwise after locating it in the pipe head of ceiling mount properly.
After wiring cables to terminals, plug the INSTALLATION USING WALL terminals into the bottom of main unit. Then, fi x MOUNT BRACKET (SCC-C7325) the main unit with sunshield with 4 screws. Use the 4 screws (provided) to secure the wall mount bracket to the wall.
Page 18
Installation After wiring cables to terminals, plug the terminals into the bottom of main unit. Then, fi x the main unit with sunshield with 4 screws. ❖ ❖ Detach protection vinyl from dome cover. 18 – 10X MINI SMART DOME CAMERA...
2 (Yellow) : IN 1 Door 3 (Brown) : IN 2 Switch Sensors 4 (Red) : Relay Out 5 (Orange) : Relay Out Lamp Relay Out ❖ SCC-C6325/ SCC-C7325 Dual Voltage DC 12V/AC 24V IrDA Sensor Door Switch Relay Out Sensors Controller/DVR...
Page 20
Installation ❖ Power Connection • Please, check the voltage and current capacity of rated power carefully. Rated power is indicated in the back of main unit. Power Consumption Power Mode Input Voltage Range C6323/ C6325 C7325 DC 12V DC 11V ~ 15V AC24V AC 20V ~ 29V ❖...
Operation CHECK POINTS BEFORE OPERATION various functions using keyboard controller as well as simplify the interface with DVR and IP equipments. • Before power is applied, please check the cables carefully. • Function • The camera ID of the controller must be identical to that <Go Preset>...
Operation PRESET • Run Auto Pan Method1) <Run Auto Pan> [Auto Pan NO.] [Enter] • Function Method2) <Go Preset> [Auto Pan NO.+140] Max. 127 positions can be stored as Preset position. ex) Run Auto Pan 2 : <Go Preset> [142]] The Preset number can be assigned from 1 to 128.
Operation • Run Pattern Tuesday at 9:00AM. If you choose Weekday, camera will move to Main gate everyday except weekend. Method 1) <Run Pattern> [Pattern NO.] It is noted that due to the real time clock, the time data ex) Run Pattern 2 : <Run Pattern> [2] will be kept regardless of blackout.
Operation • Privacy Zone Mask • P/T/Z INFORMATION To protect privacy, MAX. 4 Privacy Masks can be Current Pan/Tilt angle in degree, zoom magnifi cation created on the arbitrary position to hide objects such and a compass direction. as windows, shops or private house. With Spherical •...
1.0250 it has its sub menu. COLOR SYSTEM NTSC • For all menu level, to go into sub menu, press NEAR or PROTOCOL SAMSUNG ENTER key. BAUD RATE 9600 ADDRESS • To go to up-one-level menu, press FAR key. •...
How to use OSD Menu ❖ PRIVACY ZONE MASK SETUP Privacy Zone Size Adjustment EDIT MASK 1 PRIVACY ZONE MASK NO. UNDEFINED DISPLAY CLEAR MASK CANCEL <EDIT MASK> :ADJUST MASK WIDTH] :ADJUST MASK HEIGHT] BACK [NEAR:SELECT/ FAR:CANCEL] EXIT Adjust mask size. Use joystick or arrow buttons to Select area in image to mask.
How to use OSD Menu ❖ • AUTO FLIP [ON/OFF] Alarm Input Setup Refer to “Other Functions” section. • JOG MAX SPEED [2°/sec ~360°/sec] ALARM INPUT SETUP Sets maximum jog speed. Jog speed is inversely ALARM1 N.O PRESET1 proportional to zoom magnifi cation. As zoom ALARM2 N.C NOT USED magnifi...
How to use OSD Menu ❖ • AUTO PAN SETUP • CAM ADJUST [GENERAL/SPECIAL] Up to 8 Auto Pans are available, which makes WB(White Balance) and AE(Auto Exposure) can camera to move slowly between two preset points. be set up independently for each preset. There are 2 modes, “General”...
How to use OSD Menu ❖ Edit Preset Label AUTO PAN SETUP LABEL - PRESET 1 AUTO PAN SETUP [█ APAN NO. ---------- 1ST POS. NOT USED 1234567890 2ND POS. NOT USED ABCDEFGHIJ CANCEL KLMNOPQRST APAN SPEED 30/SEC UVWXYZabcd CLEAR APAN CANCEL efghijklmn opqrstuvwx...
How to use OSD Menu PATTERN SETUP EDIT PATTERN 1 PATTERN SETUP PATTERN NO. UNDEFINED CLR PATTERN CANCEL <EDIT PATTERN> [NEAR:SAVE / FAR:DELETE] 0/0/X1/N BACK EXIT To save data and exit, press NEAR or ENTER key. To cancel recording and delete record data, press FAR key.
Page 31
How to use OSD Menu Note that MAX. 20 Functions are allowed in a Set up items such as Action, NO., Dwell and Scan. Move cursor up/down and press NEAR OPT. or ENTER key to set up. EDIT SCAN EDIT SCAN NO.
How to use OSD Menu SCHEDULE SETUP The meaning of each value: Days: MON > TUE > WED> THU > FRI > SAT > SUN SCHEDULE SETUP WKD: Weekday MASTER ENABLE ALL: All days(Everyday) DAY TIME 1 UNDEFINED TIME 24hour Format 2 UNDEFINED PRS(Preset), AUP(Auto Pan), 3 UNDEFINED...
How to use OSD Menu CAMERA SETUP • RED ADJUST [10~60] • BLUE ADJUST [10~60] ZOOM CAMERA SETUP ❖ Auto Exposure Setup FOCUS MODE SEMIAUTO DIGITAL ZOOM IMAGE FLIP AE SETUP <WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP> BACKLIGHT DAY/NIGHT AUTO1 BRIGHTNESS IRIS AUTO...
How to use OSD Menu • SENS-UP [AUTO(2~128)/OFF] in the fi eld are changed using Up/Down keys. To save the updated data, press the NEAR or ENTER Activates Slow Shutter function when luminance key again of image (signal) is too dark. It is noted that the range of date setup is limited from It is possible to set up the maximum number of 01/JAN/2000 to 31/DEC/2037.
Page 35
How to use OSD Menu If you change the location of Home position, all FAN/HEATER SETUP horizontal locations of functions such as preset, pattern, scan, auto pan, and privacy zone mask will FAN RUN TEMP 40°C HEATER RUN TEMP 5°C be shifted based on changed Home position.
How to use OSD Menu ❖ • LANGUAGE Initial Confi guration Table You can select a preferred Language of OSD display • Display Confi guration from 7 choices. Camera ID [ENGLISH/ ESPAÑOL/ FRANÇAIS/ DEUTSCH/ ITALIANO/ РУССКИЙ/ PORTUGUÊS] PTZ Information AUTO After selecting a language, press ENTER(NEAR) key.
Page 37
How to use OSD Menu • Camera Confi guration Focus Mode SEMIAUTO Digital Zoom Image Flip White Balance AUTO Back Light Day/Night AUTO1 Brightness IRIS AUTO Shutter NORMAL MIDDLE SENS-UP • Function Data Preset 1~128 Undefi ned Auto Pan 1~8 Undefi...
Scan 8 Scan (20 action entities per Scan) Other Functions Auto Flip, Auto Parking, Power Up Action etc. Communication RS-485 Protocol Pelco-D, Pelco-P , Samsung selectable Privacy Zone 4 Zone Alarm Input 2 Input Alarm Output 1 Relay Output Menu / PTZ information etc Support 7 Languages: [ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO/...
Page 39
Scan 8 Scan (20 action entities per Scan) Other Functions Auto Flip, Auto Parking, Power Up Action etc. Communication RS-485 Protocol Auto, Pelco-D, Pelco-P, Samsung selectable Privacy Zone 4 Zone Alarm Input 2 Input Alarm Output 1 Relay Output Menu / PTZ information etc Support 7 Languages: [ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO/...
Page 40
Scan 8 Scan (20 action entities per Scan) Other Functions Auto Flip, Auto Parking, Power Up Action etc. Communication RS-485 Protocol Auto, Pelco-D, Pelco-P, Samsung selectable Privacy Zone 4 Zone Alarm Input 2 Input Alarm Output 1 Relay Output Menu / PTZ information etc Support 7 Languages: [ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO/...
Specifi cations DIMENSION Unit (mm) ❖ ❖ SCC-C6323 SCC-C6325 PIPE THREAD English – 41...
Page 42
Specifi cations Unit (mm) ❖ SCC-C7325 • Wall Mount Bracket • Ceiling Mount Bracket 42 – 10X MINI SMART DOME CAMERA...
Page 43
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Need help?
Do you have a question about the SCC-C7325 and is the answer not in the manual?
Questions and answers