Table of Contents
Advertisement
Quick Links
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
•
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347
FAX : +1-201-902-0429
SAMSUNG TECHWIN MOSCOW OFFICE
•
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
•
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
•
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. : Z6806-0676-01A
VAN 05. 10
About this manual
Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later reference.
High Resolution Day & Night
Built-in V/F Lens Camera
INSTRUCTION MANUAL
SOC-4030
Advertisement
Table of Contents
Related Manuals for Samsung SOC-4030
Summary of Contents for Samsung SOC-4030
-
Page 1: Instruction Manual
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD. • • 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business Built-in V/F Lens Camera Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145... - Page 2 Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SDC-415 SERIES • NTSC MODELS •...
-
Page 3: Table Of Contents
• SHUTTER (condition and speed control) • WHITE BALANCE control • BACKLIGHT (Backlight Compensation) Name and Function of Each Section • AGC (Auto Gain Control) Front Side • SSNR (Samsung Super Noise reduction) Back • SENS-UP • SPECIAL Installation Troubleshooting Connecting To Power Specification Panning &... - Page 4 This camera has a function that electronically By using built-in SSNR function manufactured selects the mode that is appropriate for daytime by SAMSUNG TECHWIN, the amount of low Unless the surface is suitable, it could cause falling or other hazards. or night-time conditions. The COLOR mode...
-
Page 5: Precautions
Precautions Do not install under extreme Do not install in high humidity Do not drop the camera or Never keep the camera face to temperature conditions. environment. subject it to physical shock. strong light directly. Use only under temperature conditions May lower image quality. -
Page 6: Composition
Composition Name and Function of Each Section FRONT 1. High Resolution Day & Night Built-in V/F Lens Camera SOC-4030N/P 2. DC 12V/500mA Adaptor TrIpod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera. Control Cover 3. -
Page 7: Side
Name and Function of Each Section SIDE BACK Tripod Mounting Hole Video output terminal Used to install the camera on Sends video signal and connects to the video input terminal of the monitor. 1/4"-20 UNC (20 THREAD) an optional tripod. The tripod Setting button L:4.5mm±0.2mm (ISO standard), must be equipped with the... -
Page 8: Installation
Installation Connecting to a Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to the monitor. CCD Camera Monitor • Use AC 24V/300mA or DC 12V/500mA power source for SOC-4030N/SOC-4030P. Resistance of copper wire [at 20C˚ (68˚F)] •... -
Page 9: Camera Operation
1. Please press the SETUP button • Settings can now be made. The SETUP menu is displayed on the monitor. · HIGH · OFF · LOW · MIDDLE SSNR (Samsung super noise reduction) · HIGH SENS-UP(Low illuminance) · OFF · AUTO SPECIAL · CAMERA ID ·... -
Page 10: Lens (Selection)
Camera Operation Select any function you Modes can be changed wish to operate by using the UP and using the LEFT and RIGHT buttons. DOWN buttons. 3. Please press the LEFT or RIGHT button if you wish to change mode. •... -
Page 11: Shutter (Condition And Speed Control)
Camera Operation *Please select one of the 3 modes below. SHUTTER (condition and speed control) ATW(Auto Tracking White Balance): This mode can be used within the color temperature range 1,800°K ~ 10,500°K Because of using the DC lens, the shutter speed is fixed at 1/60 (Ex. -
Page 12: Backlight (Backlight Compensation)
Camera Operation BACKLIGHT (Backlight Compensation) AGC (Auto Gain Control) When there is a strong backlight behind the object, clear images of the background 1. Please position the arrow to point to 'AGC' on the SETUP menu by using the as well as the object can still be obtained by using the BACKLIGHT function. UP and DOWN buttons. -
Page 13: Ssnr (Samsung Super Noise Reduction)
Camera Operation 1. Please position the arrow to point to 'SENS-UP' on the SETUP menu by SSNR (Samsung Super Noise reduction) using the UP and DOWN buttons. The background noise in the low light level decreases automatically as the level 2. -
Page 14: Special
Camera Operation 3) Please press the SETUP button. SPECIAL Camera ID 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using A B C D E F G H I J K L M the UP and DOWN buttons. N O P Q R S T U V W X Y Z a b c d e f g h i j k l m 2. - Page 15 Camera Operation 5) When a name has been chosen, please select a position for the name display. Notes Please move the cursor onto 'POS' and then press the SETUP button. •If AGC is OFF, you can’t select AUTO mode. Camera ID •When an infrared light is used, there may be a problem with focusing and COLOR A B C D E F G H I J K L M (DAY &...
- Page 16 Camera Operation MOTION DETECTION: •Please select the area you do not wish to appear from the 4 areas in AREA SEL mode. This product has a feature that allows you to observe movements of objects in 4 •Please select ON mode for the chosen area. different areas on the screen, and the words 'MOTION DETECTED' appear on the •Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or screen when movement is detected;...
-
Page 17: Troubleshooting
Troubleshooting If you have trouble operating your camera, refer to the following table. If the Problem Solution guidelines do not enable you to solve the problem, contact an authorized technician. The MOTION • Please check if 'MOTION DETECTION' mode is DETECTION function turned on. -
Page 18: Declaration Of Conformity
Specifications Application of Council Directive(s) 89 / 336 / EEC ITEM SOC-4030N SOC-4030P Manufacturer's Name SAMSUNG TECHWIN CO., LTD POWER AC24V 10%/ DC12V 10% compatible, Max. 3.5W Manufacturer's Address SAMSUNG TECHWIN CO., LTD Total Pixels 811(H) x 508(V) 795(H) x 596(V)