Samsung SOC-4120AN Instruction Manual page 13

Operating Your Camera
2. Set 'MOTION DET.' to the desired mode using LEFT or RIGHT button.
SETUP
CAMERA ID
BACKLIGHT
WHITE BAL.
MOTION DET.
IRIS
SHUTTER
MD1: Your camera detects the object's motion by outline or difference of a
color tone, so this mode is very useful for the daytime or observing
small moving object.
Press SET button.
Move the arrow indicator to 'AREA SET' using UP and DOWN button, and
then press the SET button.
Set the areas you want to observe.
· You can adjust the top, bottom, left and right base lines by 13 steps
from top to bottom, 18 steps from left to right with an increment of 1.
· Move the arrow indicator to 'TOP' using the UP or DOWN button and
increase or decrease the value using the LEFT or RIGHT button. Repeat the
procedure for bottom, left and right.
24
COLOR CCD CAMERA
OFF
WDR
W-ATW
OFF
LEVEL
OFF
User's Manual
18
13
Maximum
· When completed, press SET button.
MD2: Your camera detects object's motion by the variation of brightness, so
this mode is very useful for night or observing large moving object.
Also MD2 enables you to set seperated areas.
Press SET button.
Move the arrow indicator to 'AREA SET' like MD1.
Set the areas you want to observe of the 48 areas.
· Move the cursor to the area you want to observe, and then press the SET button.
· After setting, move the cursor to edge in any direction and then press the
button just one more, let 'END' blink.
· Press the SET button.
Notes
• If you set some areas of 48 areas, your camera detects the object's motion within
the areas you set.
25
COLOR CCD CAMERA
6
5
Minimum
User's Manual